Small S-type Aerosol Fire Extinguishing Device: Compact Automatic Fire Control


We at Hubei Hezhi Fire Protection Technology make this Small S-type Aerosol Fire Extinguishing Device for enclosed spaces where a compact automatic extinguisher is needed. The product page gives the activation methods, the fire classes, the safety distances and the model table, so an engineer can match a unit to a cabinet, a room or a machine. This article explains how the device works and what to confirm before an order.

What the Device Is

The product is a small S-type aerosol fire suppression device. It uses a sealed stainless steel cylinder that operates without internal pressure, so the housing can withstand high temperature and a corrosive environment. When the unit activates, it releases nanoparticles and inert gases that suppress the flame with a lower agent dosage than a conventional system.

The page describes the device as a light and cost effective solution. It needs no piping network, which makes the installation simple, and it leaves no harmful residue after discharge. That last point matters for a room with electronics, because a clean agent reduces the cleanup and the downtime after a fire.

Activation Methods

The device can be activated in three ways. The thermal wire method uses a wire that self ignites at its activation temperature or when it meets an open flame and sends the signal to the unit. The electric method takes a DC24V signal from a fire alarm panel or a gas control panel. The impact method uses a fusible metal or a glass bulb that releases a firing pin at a set temperature.

The page gives the activation values: thermal line start at 178 degrees Celsius, electric start at DC24V and 1A, and impact start at 68 degrees Celsius. A project should choose the method that fits the detection and the power available on site. A cabinet with no power can use the thermal or the impact method, while a room with a fire panel can use the electric method.

Performance and Safety

The firefighting time is no more than 30 seconds. The safe distance from the nozzle to people is 1.5 meters, and the safe distance from the nozzle to the fire target is 0.3 meters. The nozzle temperature is no more than 200 degrees Celsius at 5 mm from the nozzle, and the housing surface is no more than 200 degrees Celsius. Those distances should be marked on the installation drawing.

The device can extinguish Class A, B, C and E fires. The page gives a fire suppression effectiveness of at least 100 grams per cubic meter, a feedback signal by normally open or normally closed passive contacts, an operating environment of minus 50 to 90 degrees Celsius, and a fully submerged extinguishing method. The buyer should confirm the protected volume and the class of fire before selecting a model.

Models and Protected Volume

The model table runs from a 10 gram unit with a 0.1 cubic meter protection volume to a 3000 gram unit with a 30 cubic meter volume. The small units use a 58 by 56 by 31 mm body, the mid units use a 100 by 74 by 45 mm body, and the larger units use a cylindrical body from 76 mm to 219 mm in diameter. A project should choose the model by the protected volume and the fire load, not by the smallest size.

Installation and Maintenance

The page says the sturdy design virtually eliminates maintenance needs. A user should still inspect the unit at the interval in the manual, check the housing for damage and keep the record of the installation date. A device that has fired must be replaced, not recharged, and the spent unit should be handled as the supplier instructs.

About Hezhi Fire

Hubei Hezhi Fire Protection Technology Co., Ltd. is based at Building 6, Lingang Industrial Park Innovation and Entrepreneurship Incubation Base, Xiaochi Town, Huangmei County, Huanggang City, Hubei Province, China. The company says it works on the research, development, production and sales of fire suppression systems, and its range includes heptafluoropropane, aerosol, ultra-fine dry powder, high pressure water mist, IG541, IG100, fire detection tube and perfluorohexanone systems.

The contact page lists the telephone 0713-3201119, the mobile 8619171079119 for Mr. Hu and the email 648740496@qq.com. A buyer can ask for the certificate, the inspection report and the model drawing for a project. The company also lists a case center and a partner page, which a consultant can review before a specification is written.

Next Step

To request a quotation for the Small S-type Aerosol Fire Extinguishing Device, send the protected volume, the fire class, the activation method, the mounting space, the quantity and the destination. We will confirm the model, the bracket and the feedback wiring that fit the space. A drawing and a certificate can be provided for the design review.


Relevant documents